diskio.h File Reference
#include "kubos-core/modules/fatfs/integer.h"
Go to the source code of this file.
Macros | |
#define | _USE_WRITE 1 /* 1: Enable disk_write function */ |
#define | _USE_IOCTL 1 /* 1: Enable disk_ioctl fucntion */ |
#define | STA_OK 0x00 /* Disk is all good */ |
#define | STA_NOINIT 0x01 /* Drive not initialized */ |
#define | STA_NODISK 0x02 /* No medium in the drive */ |
#define | STA_PROTECT 0x04 /* Write protected */ |
#define | CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */ |
#define | GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */ |
#define | GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */ |
#define | GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */ |
#define | CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */ |
#define | CTRL_POWER 5 /* Get/Set power status */ |
#define | CTRL_LOCK 6 /* Lock/Unlock media removal */ |
#define | CTRL_EJECT 7 /* Eject media */ |
#define | CTRL_FORMAT 8 /* Create physical format on the media */ |
#define | MMC_GET_TYPE 10 /* Get card type */ |
#define | MMC_GET_CSD 11 /* Get CSD */ |
#define | MMC_GET_CID 12 /* Get CID */ |
#define | MMC_GET_OCR 13 /* Get OCR */ |
#define | MMC_GET_SDSTAT 14 /* Get SD status */ |
#define | ISDIO_READ 55 /* Read data form SD iSDIO register */ |
#define | ISDIO_WRITE 56 /* Write data to SD iSDIO register */ |
#define | ISDIO_MRITE 57 /* Masked write data to SD iSDIO register */ |
#define | ATA_GET_REV 20 /* Get F/W revision */ |
#define | ATA_GET_MODEL 21 /* Get model name */ |
#define | ATA_GET_SN 22 /* Get serial number */ |
Typedefs | |
typedef BYTE | DSTATUS |
Enumerations | |
enum | DRESULT { RES_OK = 0, RES_ERROR, RES_WRPRT, RES_NOTRDY, RES_PARERR } |
Functions | |
DSTATUS | disk_initialize (BYTE pdrv) |
DSTATUS | disk_status (BYTE pdrv) |
DRESULT | disk_read (BYTE pdrv, BYTE *buff, DWORD sector, UINT count) |
DRESULT | disk_write (BYTE pdrv, const BYTE *buff, DWORD sector, UINT count) |
DRESULT | disk_ioctl (BYTE pdrv, BYTE cmd, void *buff) |
DWORD | get_fattime (void) |
Macro Definition Documentation
#define _USE_IOCTL 1 /* 1: Enable disk_ioctl fucntion */ |
#define _USE_WRITE 1 /* 1: Enable disk_write function */ |
#define ATA_GET_MODEL 21 /* Get model name */ |
#define ATA_GET_REV 20 /* Get F/W revision */ |
#define ATA_GET_SN 22 /* Get serial number */ |
#define CTRL_EJECT 7 /* Eject media */ |
#define CTRL_FORMAT 8 /* Create physical format on the media */ |
#define CTRL_LOCK 6 /* Lock/Unlock media removal */ |
#define CTRL_POWER 5 /* Get/Set power status */ |
#define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */ |
#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */ |
#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */ |
#define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */ |
#define ISDIO_MRITE 57 /* Masked write data to SD iSDIO register */ |
#define ISDIO_READ 55 /* Read data form SD iSDIO register */ |
#define ISDIO_WRITE 56 /* Write data to SD iSDIO register */ |
#define MMC_GET_CID 12 /* Get CID */ |
#define MMC_GET_CSD 11 /* Get CSD */ |
#define MMC_GET_OCR 13 /* Get OCR */ |
#define MMC_GET_SDSTAT 14 /* Get SD status */ |
#define MMC_GET_TYPE 10 /* Get card type */ |
#define STA_NODISK 0x02 /* No medium in the drive */ |
#define STA_NOINIT 0x01 /* Drive not initialized */ |
#define STA_OK 0x00 /* Disk is all good */ |
#define STA_PROTECT 0x04 /* Write protected */ |
Typedef Documentation
Enumeration Type Documentation
enum DRESULT |
Function Documentation
DWORD get_fattime | ( | void | ) |