[−][src]Enum novatel_oem6_api::ResponseID
Response values returned after sending a command to the device.
Error values will be returned as part of the OEMError::CommandError
variant.
Variants
Ok
Command was received correctly
LogInvalid
Requested log type does not exist
OutOfResources
The request has exceeded some (unspecified) limit
PacketNotVerified
Data packet is not verified
CommandFailed
Command was attempted, but failed
InvalidID
Input message ID is not valid
InvalidField
An input field was invalid. See the OEMError::CommandError
variant's description
field for
information about the specific field that caused the error.
InvalidChecksum
The checksum of the sent message was invalid
MissingField
A field is missing from the sent message
ArrayOverflow
An input field contains more array elements than allowed. See the OEMError::CommandError
variant's description
field for information about the specific field that caused the error.
ErrorField
An input field's value is outside acceptable limits. See the OEMError::CommandError
variant's
description
field for information about the specific field that caused the error.
InvalidTrigger
The requested trigger type is invalid for the requested log type
AuthcodeOverflow
Too many authcodes are stored in the receiver. The receiver firmware must be reloaded
InvalidDate
This error is related to the inputting of authcodes. Indicates the date attached to the code is not valid
InvalidAuthcode
The authcode entered is not valid
NoModel
The model requested for removal does not exist
InvalidModel
The model attached to the authcode is not valid
InvalidChannel
The selected channel is invalid
InvalidRate
The requested rate is invalid
NoMask
The word has no mask for this type of log
LockedChannels
Channels are locked due to an error
InvalidTime
The injected time is invalid
InvalidPort
The COM/USB port is not supported
InvalidMessage
The sent message is invalid
InvalidPRN
The PRN is invalid
PRNNotLocked
The PRN is not locked out
PRNLockoutOverflow
The PRN lockout list is full
PRNAlreadyLocked
The PRN is already locked out
Timeout
Message timed out
UnknownPort
Unknown COM/USB port requested
BadHex
Hex string not formatted correctly
InvalidBaud
The baud rate is invalid
ModelInvalidMessage
The sent message is invalid for this model of receiver
RequiresFailMode
Command is only valid if NVM is in fail mode
InvalidOffset
The offset is invalid
MessageOverflow
The maximum number of user messages has been reached
PreciseTimeAlreadyKnown
GPS precise time is already known
Unknown
Catch-all value for unknown response IDs
Trait Implementations
impl PartialEq<ResponseID> for ResponseID
[src]
impl PartialEq<ResponseID> for ResponseID
fn eq(&self, other: &ResponseID) -> bool
[src]
fn eq(&self, other: &ResponseID) -> bool
#[must_use]
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
#[must_use]
fn ne(&self, other: &Rhs) -> bool
This method tests for !=
.
impl From<u32> for ResponseID
[src]
impl From<u32> for ResponseID
fn from(t: u32) -> ResponseID
[src]
fn from(t: u32) -> ResponseID
impl Clone for ResponseID
[src]
impl Clone for ResponseID
fn clone(&self) -> ResponseID
[src]
fn clone(&self) -> ResponseID
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Debug for ResponseID
[src]
impl Debug for ResponseID
Auto Trait Implementations
impl Send for ResponseID
impl Send for ResponseID
impl Sync for ResponseID
impl Sync for ResponseID
Blanket Implementations
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T