[−]Enum novatel_oem6_api::BaudRate
Serial port baud rates.
Portability
The BaudRate variants with numeric suffixes, e.g., Baud9600, indicate standard baud rates
that are widely-supported on many systems. While non-standard baud rates can be set with
BaudOther, their behavior is system-dependent. Some systems may not support arbitrary baud
rates. Using the standard baud rates is more likely to result in portable applications.
Variants
Baud110110 baud.
Baud300300 baud.
Baud600600 baud.
Baud12001200 baud.
Baud24002400 baud.
Baud48004800 baud.
Baud96009600 baud.
Baud1920019,200 baud.
Baud3840038,400 baud.
Baud5760057,600 baud.
Baud115200115,200 baud.
BaudOther(usize)Non-standard baud rates.
BaudOther can be used to set non-standard baud rates by setting its member to be the
desired baud rate.
serial_core::BaudOther(4_000_000); // 4,000,000 baud
Non-standard baud rates may not be supported on all systems.
Methods
impl BaudRate
[−]
impl BaudRatepub fn from_speed(speed: usize) -> BaudRate
[−]
pub fn from_speed(speed: usize) -> BaudRateCreates a BaudRate for a particular speed.
This function can be used to select a BaudRate variant from an integer containing the
desired baud rate.
Example
assert_eq!(BaudRate::Baud9600, BaudRate::from_speed(9600)); assert_eq!(BaudRate::Baud115200, BaudRate::from_speed(115200)); assert_eq!(BaudRate::BaudOther(4000000), BaudRate::from_speed(4000000));
pub fn speed(&self) -> usize
[−]
pub fn speed(&self) -> usizeReturns the baud rate as an integer.
Example
assert_eq!(9600, BaudRate::Baud9600.speed()); assert_eq!(115200, BaudRate::Baud115200.speed()); assert_eq!(4000000, BaudRate::BaudOther(4000000).speed());
Trait Implementations
impl Clone for BaudRate
[+]
impl Clone for BaudRateimpl Copy for BaudRate
impl Copy for BaudRateimpl Debug for BaudRate
[+]
impl Debug for BaudRateimpl Eq for BaudRate
impl Eq for BaudRateimpl PartialEq<BaudRate> for BaudRate
[+]
impl PartialEq<BaudRate> for BaudRateAuto Trait Implementations
Blanket Implementations
impl<T> From for T[src]
[−]
impl<T> From for Timpl<T, U> Into for T where
U: From<T>, [src]
[−]
impl<T, U> Into for T where
U: From<T>, impl<T> ToOwned for T where
T: Clone, [src]
[−]
impl<T> ToOwned for T where
T: Clone, type Owned = T
fn to_owned(&self) -> T[src]
[−]
fn to_owned(&self) -> TCreates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)[src]
[−]
fn clone_into(&self, target: &mut T)🔬 This is a nightly-only experimental API. (toowned_clone_into)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T, U> TryFrom for T where
T: From<U>, [src]
[−]
impl<T, U> TryFrom for T where
T: From<U>, type Error = !
try_from)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
[−]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>try_from)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized, [src]
[−]
impl<T> Borrow for T where
T: ?Sized, impl<T> BorrowMut for T where
T: ?Sized, [src]
[−]
impl<T> BorrowMut for T where
T: ?Sized, fn borrow_mut(&mut self) -> &mut T[src]
[−]
fn borrow_mut(&mut self) -> &mut TMutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>, [src]
[−]
impl<T, U> TryInto for T where
U: TryFrom<T>, type Error = <U as TryFrom<T>>::Error
try_from)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
[−]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>try_from)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized, [src]
[−]
impl<T> Any for T where
T: 'static + ?Sized, fn get_type_id(&self) -> TypeId[src]
[−]
fn get_type_id(&self) -> TypeId🔬 This is a nightly-only experimental API. (get_type_id)
this method will likely be replaced by an associated static
Gets the TypeId of self. Read more