Example Kubos Projects¶
We have provided a variety of example applications to help you get started with your Kubos project. These examples are located in the ‘Examples’ folder of the Kubos repo, as well as within the /home/vagrant/.kubos/kubos/examples folder of the Kubos SDK box.
Using an Example Application¶
Each of the example applications contains the files necessary to run as an independent Kubos project.
This means you can simply copy the desired example to a new folder and immediately build it with the kubos build command.
“Compatible Targets” indicates which target boards for which the application should execute successfully without modification.
Note
The default target for all of these applications is stm32f407-disco-gcc.
You will need to manually change the target if this is not your desired endpoint device.
Default Example¶
Compatible Targets: All targets
| High-level Component | Specific Area |
|---|---|
| Kubos CSP [4] | sockets, ping, threads |
This is the default application included when the kubos init --linux command is executed.
It is intended as a basic example of how an application could be written to run on a Kubos Linux system.
The application contains a CSP interaction between client and server tasks.
Every 200ms, the CSP client thread pings the CSP server’s address to see if it is available, and then connects and sends a CSP packet containing the message “Hello World”.
The CSP server thread checks for connections on the CSP port and then prints any received messages to STDOUT.
TCP Receive¶
Compatible Targets: Pumpkin MBM2, Beaglebone Black
| High-level Component | Specific Area |
|---|---|
| Linux | sockets, TCP, IPv4 |
This is a demo program to test receiving TCP data over a valid IP connection (the ethernet port for the Pumpkin MBM2 and Beaglebone Black targets)
The program will wait for a client to connect over the socket, then read in any messages and send back a reply.
TCP Send¶
Compatible Targets: Pumpkin MBM2, Beaglebone Black
| High-level Component | Specific Area |
|---|---|
| Linux | sockets, TCP, IPv4 |
This is a demo program to test sending TCP data over a valid IP connection (the ethernet port for the Pumpkin MBM2 and Beaglebone Black targets)
The program takes the IP address and port to send to as input parameters, then sends a test message to the requested end point. It then waits for a reply message to be returned and exits.
Usage: kubos-linux-tcptx <ip_addr> <port>
UART Receive¶
Compatible Targets: All targets with UART ports
| High-level Component | Specific Area |
|---|---|
| Linux | termios |
This is a demo program to test receiving UART data in non-blocking mode as an interrupt. It expects to read the incrementing message “Test message nnn” every 5 seconds from /dev/ttyS1.
This program should be paired with the UART Send demo program.
UART Send¶
Compatible Targets: All targets with UART ports
| High-level Component | Specific Area |
|---|---|
| Linux | termios |
This is a demo program to test UART transmission. It will write an incrementing message “Test message nnn” every 5 seconds out of /dev/ttyS3.
This program should be paired with the UART Receive demo program.
References¶
| [1] | config.json - Kubos project file for custom configuration options |
| [3] | Kubos HAL - Kubos hardware abstraction for interfacing with peripheral devices |
| [4] | CSP - (Cubesat Space Protocol) Lightweight communication protocol |