File Transfer Service

The file transfer service is used to transfer files between the mission operations center and the OBC. It may also be used to transfer files between a developer’s system and the OBC when in a development environment.

The service provides file transfer functionality by implementing the file protocol. The file protocol is UDP-based which means a connection is required between the OBC and ground segment capable of transferring UDP packets. This should be established using a standard network connection.

Overview

@startuml hide empty description state "Receive Message" as Receive state "Export Request" as Export state "Import Request" as Import [*] --> Receive Receive : Process transaction request from client Receive -down-> Metadata Metadata : Save file metadata information Metadata --> Done Receive -left-> Export Export : Prepare to receive file from client Export --> Receiving state Receiving { state "Chunk Message" as Chunk state "Success" as Receive_Success state "Failure" as Receive_Failure state "Wait" as Receive_Wait state "ACK" as Receive_ACK state "NAK" as Receive_NAK state "Timeout" as Receive_Timeout [*] -down-> Verify Verify : Check file status Verify -right-> Receive_ACK : All chunks received Receive_ACK : Send ACK message to client Receive_ACK --> Finalize Verify -left-> Receive_NAK : Some chunks missing Receive_NAK : Send NAK message to client Receive_NAK --> Receive_Wait Receive_Wait : Wait for chunk data from client Receive_Wait -down-> Chunk Chunk : Save chunk data Chunk --> Receive_Wait Receive_Wait -right-> Receive_Timeout Receive_Timeout : Increase timeout counter Receive_Timeout -up-> Verify : Counter < limit Receive_Timeout --> Finalize : Counter >= limit Finalize : Re-assemble chunks and verify integrity Finalize --> Receive_Success : Hash verification passed Receive_Success : Send success message to client Receive_Success --> [*] Finalize --> Receive_Failure : Hash verification failed Receive_Failure : Send failure message to client Receive_Failure --> [*] } Receiving --> Done Receive -right-> Import Import : Prepare to transmit file to client Import --> Initialize Initialize : Import file into temporary storage and calculate hash Initialize --> Transmit_Failure Transmit_Failure : Send failure message to client Transmit_Failure --> Done Initialize --> Transmit_Success Transmit_Success : Send success message to client with file metadata Transmit_Success --> Transmitting state Transmitting { state "Success" as Transmit_Success state "Failure" as Transmit_Failure state "Wait" as Transmit_Wait state "ACK" as Transmit_ACK state "NAK" as Transmit_NAK state "Timeout" as Transmit_Timeout state "Send Chunk" as Send [*] --> Transmit_Wait Transmit_Wait : Wait for file status message from client Transmit_Wait --> Transmit_ACK Transmit_ACK : Receive ACK from client Transmit_ACK --> [*] Transmit_Wait --> Transmit_NAK Transmit_NAK : Receive NAK from client Transmit_NAK -up-> Send Send --> Send : For all missing chunks Send : Send chunk data message to client Send -left-> Transmit_Wait Transmit_Wait --> Transmit_Timeout Transmit_Timeout --> Transmit_Wait : Counter < limit Transmit_Timeout : Increase timeout counter Transmit_Timeout --> [*] : Counter >= limit } Transmitting --> Done @enduml

The file transfer service listens for requests on its configured UDP socket.

When a message is received, it is then processed using the file protocol message engine. This logic keeps track of the current state of each client connection and takes the appropriate action depending on the current state and the particular message received.

Actions may also be taken if the service experiences a timeout while waiting for a follow-up message from a client. For example, if a client initiates an export operation and then stops communicating while in the middle of sending file chunks, the service will timeout, check the current status of the file, and then send a NAK to the client with the current missing chunks. Receiving this NAK should cause the client to resume transmitting file chunk data.

Note

This timeout is currently hardcoded to two seconds. It will be a configurable option in a future release.

In order to support simultaneous client connections, whenever a message is received on the main UDP socket, a new socket is spawned in order to handle the rest of the transaction. As a result, after sending the initial import or export request, the transfer client should listen for a reply and then use the new socket as the destination for future transmissions.

Configuration

The file transfer service has several configuration options which may be defined in the system’s config.toml file:

  • [file-transfer-service]

    • storage_dir - Default: “file-transfer”. The directory which should be used for temporary storage of file chunks. Note: The directory will be created if it does not already exist.
    • timeout - Default: 2. The length of time, in seconds, for which the service should wait for new messages from the client once a file protocol transaction has been started
    • chunk_size - Default: 4096. Each file is broken up into equally sized chunks prior to transfer. This option specifies the size of those chunks in bytes.
    • hold_count - Default: 5. The number of times the protocol waits for a new message before ending the transaction.

  • [file-transfer-service.addr]

    • ip - Specifies the service’s IP address
    • port - Specifies the port on which the service will be listening for UDP packets

For example:

[file-transfer-service]
storage_dir = "my/storage/directory"
timeout = 3600

[file-transfer-service.addr]
ip = "0.0.0.0"
port = 7000

Future configuration options:

  • Maximum number of timeout-retry attempts
  • Non-default destination IP/port

Running the Service from KubOS

The Kubos Linux distribution (as of v1.3.0) ships with the file transfer service installed and configured to run on boot. This can be verified by booting the KubOS system, running the ps command and looking for the file-service process. If the service is not running then it can be started like so:

$ /etc/init.d/S90file-service start

Running the Service from Source

The file transfer service can also be run from source if required. The source is located in the folder kubos/services/file-service in the KubOS source repo. The service can be started like so:

$ cd kubos/services/file-service
$ cargo run -- -c config.toml

The service will look for the given config.toml file in order to get the needed configuration options.