[−][src]Crate isis_ants_service

Kubos Service for interacting with ISIS Antenna Systems

Configuration

The service must be configured in /home/system/etc/config.toml with the following fields:

[isis-ants-service.addr]
- ip - Specifies the service's IP address
- port - Specifies the port on which the service will be listening for UDP packets
[isis-ants-service]
- bus - Specifies the I2C bus the antenna system is connected to
- primary - Specifies the I2C address of the antenna system's primary microcontroller
- secondary - Specifies the I2C address of the secondary microcontroller. If no secondary contoller is present, this value should be "0x00".
- antennas - Specifies the number of antennas present in the system. Expected value: 2 or 4.
- wd_timeout - Specifies the interval at which the AntS watchdog should be automatically kicked. To disable automatic kicking, this value should be 0.

For example:

[isis-ants-service.addr]
ip = "0.0.0.0"
port = 8006

[isis-ants-service]
bus = "KI2C1"
primary = "0x31"
secondary = "0x32"
antennas = 4
wd_timeout = 10

Starting the Service

The service should be started automatically by its init script, but may also be started manually:

$ isis-ants-service
Kubos antenna systems service started
Listening on: 0.0.0.0:8006

Queries

Ping

Test query to verify service is running without attempting to communicate with the underlying subsystem

{
    ping: "pong"
}

ACK

Get the last run mutation

{
    ack: AckCommand
}

Errors

Get all errors encountered since the last time this field was queried

{
    errors: [String]
}

Power Status

Get the current power state and uptime of the system

{
    power {
        state: PowerState,
        uptime: Int
    }
}

Configuration

Get the current microcontroller which commands will be sent to

{
    config: ConfigureController
}

Telemetry

Get current telemetry information for the system

{
    telemetry {
        nominal {
            rawTemp: Int,
            uptime: Int,
            sysBurnActive: Boolean,
            sysIgnoreDeploy: Boolean,
            sysArmed: Boolean,
            ant1NotDeployed: Boolean,
            ant1StoppedTime: Boolean,
            ant1Active: Boolean,
            ant2NotDeployed: Boolean,
            ant2StoppedTime: Boolean,
            ant2Active: Boolean,
            ant3NotDeployed: Boolean,
            ant3StoppedTime: Boolean,
            ant3Active: Boolean,
            ant4NotDeployed: Boolean,
            ant4StoppedTime: Boolean,
            ant4Active: Boolean
        },
           debug {
            ant1ActivationCount: Int,
            ant1ActivationTime: Int,
            ant2ActivationCount: Int,
            ant2ActivationTime: Int,
            ant3ActivationCount: Int,
            ant3ActivationTime: Int,
            ant4ActivationCount: Int,
            ant4ActivationTime: Int,
        }
    }
}

Test Results

Get the test results of the last run test

Note: For this service, this actually just fetches the nominal and debug telemetry of the system, since there is no actual built-in test

{
    testResults{
        success,
        telemetryNominal{...},
        telemetryDebug{...}
    }
}

System Armed Status

Get the current armed/disarmed status of the system

{
    armStatus: ArmStatus
}

System deployment status

Get the current deployment status of the system

{
    deploymentStatus {
        status: DeploymentStatus,
        sysBurnActive: Boolean,
        sysIgnoreDeploy: Boolean,
        sysArmed: Boolean,
        ant1NotDeployed: Boolean,
        ant1StoppedTime: Boolean,
        ant1Active: Boolean,
        ant2NotDeployed: Boolean,
        ant2StoppedTime: Boolean,
        ant2Active: Boolean,
        ant3NotDeployed: Boolean,
        ant3StoppedTime: Boolean,
        ant3Active: Boolean,
        ant4NotDeployed: Boolean,
        ant4StoppedTime: Boolean,
        ant4Active: Boolean
}

Mutations

Errors

Get all errors encountered while processing this GraphQL request

Note: This will only return errors thrown by fields which have already been processed, so it is recommended that this field be specified last.

mutation {
    errors: [String]
}

No-Op

Execute a trivial command against the system

mutation {
    noop {
        errors: String,
        success: Boolean
   }
}

Set Power State

Control the power state of the system

state: Power state the system should be changed to Note: The only valid input for this service is RESET

mutation {
    controlPower(state: PowerState) {
        errors: String,
        success: Boolean,
        power: PowerState
    }
}

Configuration

Configure the system

config: Set which microcontroller future commands should be issued from

mutation {
    configureHardware(config: ConfigureController) {
        errors: String,
        success: Boolean,
        config: ConfigureController
   }
}

System Self-Test

Run a system self-test

test: Type of self-test to perform

mutation {
    testHardware(test: TestType) {
        ... on IntegrationTestResults {
            errors: String,
            success: Boolean,
            telemetryNominal{...},
            telemetryDebug{...}
        }
        ... on HardwareTestResults {
            errors: "Not Implemented",
            success: true,
            data: Empty
        }
   }
}

Passthrough

Pass a custom command through to the system

command: String containing the hex values to be sent (ex. "C3") It will be converted to a byte array before transfer.
rxLen: Number of response bytes to read

mutation {
    issueRawCommand(command: String, rx_len: Int) {
        errors: String,
        success: Boolean,
        response: String
    }
}

Arm/Disarm

Arm/Disarm the system

state: Armed/Disarmed state the system should be changed to

mutation {
    arm(state: ArmState) {
        errors: String,
        success: Boolean
   }

Deploy Antennas

Deploy antenna/s

ant: (Default - All) Antenna to deploy
force: (Default - false) Whether current deployment state should be ignored/overridden
time: Maximum amount of time to spend attempting to deploy the antenna (for 'All', this is the amount of time spent for each antenna)

mutation {
    deploy(ant: DeployType = DeployType::All, force: Boolean = false, time: Int) {
        errors: String,
        success: Boolean
   }
}

Structs

AntennaStats	Antenna status data
ConfigureHardwareResponse	Response fields for 'configureHardware' mutation
ControlPowerResponse	Response fields for 'controlPower' mutation
GenericResponse	Common response fields structure for requests which don't return any specific data
GetDeployResponse	Response fields for 'deploymentStatus' query
GetPowerResponse	Response fields for 'power' query
HardwareTestResults	Response fields for 'testHardware(test: HARDWARE)' mutation
IntegrationTestResults	Response fields for 'testHardware(test: INTEGRATION)' mutation
RawCommandResponse	Response fields for 'issueRawCommand' mutation
Telemetry	Response fields for 'telemetry' query
TelemetryDebug	Debug telemetry data
TelemetryNominal	Nominal telemetry data

Enums

AckCommand	Return field for 'ack' query
ArmState	Input field for 'arm' mutation
ArmStatus	Return field for 'armStatus' query
ConfigureController	Input field for 'configureHardware' mutation
DeployType	Input field for 'deploy' mutation
DeploymentStatus	Enum for 'deployStatus' response field of 'deploymentStatus' query
PowerState	Input field for 'controlPower' mutation and response field for 'power' query
TestResults	Enum for the 'testHardware' mutation response union
TestType	Input field for 'testHardware' mutation

Type Definitions

ArmResponse	Response fields for 'arm' mutation
DeployResponse	Response fields for 'deploy' mutation
NoopResponse	Response fields for 'noop' mutation