Getting Started with KubOS and the Kubos SDK¶
This tutorial guides the user through the process of creating a new Kubos project using Python2.7 and installing and running it on a target OBC.
The iOBC does not support Python. If this is the board which you are using, please refer to the Using Rust with the Kubos SDK doc to get your first project built and running on the OBC.
After going through that document, please refer to the mission application tutorial for information about creating your first mission application.
Creating your Project¶
Like all good programming tutorials, we’ll start with a basic “Hello, World” program.
Log into your SDK VM and then create a new folder for your project.
Within that folder, create a new file,
hello_world.py, which will print “Hello, World!”
and then exit.
print "Hello, World!"
Running the Project Locally¶
The Kubos SDK should have all resources required to run the project locally.
Our example project can be run like so:
$ python hello_world.py Hello, World!
Logging in to KubOS¶
By default, KubOS comes with a user account,
kubos, with the default password
Log into your OBC using SSH and its configured IP address. Enter the password when prompted.
$ ssh firstname.lastname@example.org email@example.com's password: ********
If this is your first time connecting to the board via SSH, you may be prompted to confirm the target IP’s authenticity. Enter “yes” if this occurs:
$ ssh firstname.lastname@example.org The authenticity of host '10.0.2.20 (10.0.2.20)' can't be established. ECDSA key fingerprint is SHA256:ir2TC+iML+MJ5Cb3cxTReWI69aX6EtPysFQzWleKc+8. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.2.20' (ECDSA) to the list of known hosts. email@example.com's password: ********
Please confirm that you are able to connect to the board via SSH from the SDK before proceeding with the next step. If you are unable to do so, please verify that your OBC’s network connection has been successfully configured and activated.
Once you are logged in to the OBC, you can use the
exit command to end the SSH connection and
return to the SDK.
Transferring the Project to a Target OBC¶
We can now transfer the project to the
kubos user home directory on the target OBC using SCP.
From the SDK’s command line, run the following (be sure to replace
10.0.2.20 with your OBC’s
$ scp hello_world.py firstname.lastname@example.org:/home/kubos email@example.com's password: ******** hello_world.py 100% 21 0.0KB/s 00:00
Running the Project on the Target OBC¶
Once the project has been transferred, we can log in to the OBC and run it:
$ ssh firstname.lastname@example.org email@example.com's password: ******** /home/kubos # python hello_world.py Hello, World!