KubOS for the Pumpkin MBM2¶
The CubeSat Kit Motherboard Module (MBM) 2 reference document is available from Pumpkin and is a useful document for learning what each of the hardware components are and how they are connected.
The Pumpkin MBM2 should be shipped with a USB Debug Adapter board.
The white connection cable should be plugged into the labeled “UART0” port on the edge of the board, with the exposed pins facing up.
The USB cable can then be plugged into your computer. Any required drivers should be automatically installed.
This connection will be passed through to a Kubos Vagrant image as /dev/FTDI and will be used for the serial console.
Please refer to our ethernet overview for help setting up an SSH connection over ethernet.