KubOS for the Beaglebone Black

• Installing Kubos Linux on a Beaglebone Black
• Working with the Beaglebone Black

Reference Documents

• Beaglebone Black Web Page
• Beaglebone Black Wiki
• Beaglebone Black Hardware Diagrams
• Beaglebone Black System Reference Manual Rev C

Debug Console Connection

As documented in section 7.5 of the Beaglebone Black System Reference Manual, an FTDI cable can be connected to the serial debug connector in order to establish a debug console connection.

This connection will be passed through to a Kubos Vagrant image as /dev/FTDI.

Ethernet Connection

Please refer to our ethernet overview for help setting up an SSH connection over ethernet.

Peripherals

By default, KubOS exposes the following peripheral components:

• Ethernet
• 2 I2C buses
• 1 SPI bus
• 5 UART buses
• 7 ADC pins
• Many GPIO pins

More information about these peripheral devices can be found in the Working with the Beaglebone Black doc.