Communications Service Framework ================================ The hardware used to establish communication between a satellite and the ground varies wildly from mission to mission. As a result, KubOS provides a communications service framework which can be used by developers when creating their specific radio's hardware service. This framework is used to simplify the process of reading messages from the ground, forwarding them to the appropriate internal destination, and then sending properly formatted messages back to the ground. .. note:: The communications service framework is currently only available in Rust. As a result, services wishing to utilize the framework should also be written in Rust. Architecture ------------ .. figure:: ../images/comms_arch.png :align: center Data Packets ~~~~~~~~~~~~ All packets sent to/from the communication device will be encapsulated in several layers. .. uml:: @startuml package "Radio Protocol" { package "UDP" { rectangle "Message Data" } } @enduml The first layer will be whatever communication protocol the device requires. For example, AX.25 is frequently used as the header protocol for radio communication. Inside of this will be a UDP packet containing one of the following: - GraphQL query or mutation - JSON GraphQL responses - File/shell service commands or data - Any other application data a payload or mission application might need Ground Communication ~~~~~~~~~~~~~~~~~~~~ The communications service maintains a constant read thread which listens for messages from the ground via the communications device. Once a message is received, a message handler thread is spawned. This message handler examines the destination port embedded in the message's UDP packet header to determine the internal message destination and then makes an HTTP POST to the appropriate service. The handler then waits for a response (within a specified timeout duration), wraps the response in a UDP packet, and then sends the packet to the communications device for transmission. Once this transaction has completed, the message handler thread exits. .. uml:: @startuml hide footbox actor "Ground Station" as ground participant Radio ground -> Radio : 1. Send command to satellite box "Communications Service" #LightBlue participant "Read Thread" as read Radio <- read : 2. Read data packets from radio read -> read : 3. Deframe data packets read -> read : 4. Reassemble data packet create "Message Handler" as handler read -> handler : 5. Spawn new message handler activate handler end box participant "Kubos Service" as service handler -> service : 6. Posts GraphQL query/mutation to service service -> handler : 7. Return result of query/mutation handler -> handler : 8. Wrap result in UDP packet handler -> Radio : 9. Send response packet to radio destroy handler Radio -> ground : 10. Send response packet to ground @enduml Downlink Endpoints ~~~~~~~~~~~~~~~~~~ There are some instances where the satellite might need to send a message to the ground without first receiving a request for data. An example would be when sending a periodic health-and-status beacon. In this case, the communications service may be defined with a downlink endpoint thread (or multiple threads if more than one method may be used for downlink communication). Each endpoint is assigned its own UDP port and maintains a constant read thread which listens for messages from within the satellite which should be transmitted. When the endpoint's read thread receives a message, it wraps it up in a UDP packet and then sends it to the communications device, via the user-defined write function. .. uml:: @startuml hide footbox actor "Mission application" as app participant "Communications Service\nDownlink Endpoint" as downlink participant Radio actor "Ground Station" as ground app -> downlink : 1. Send data to downlink endpoint downlink -> downlink : 2. Wrap data in UDP packet downlink -> Radio : 3. Send data packet to radio Radio -> ground : 4. Send data packet to ground @enduml Configuration ------------- Most missions tend to have a single communications device which communicates via a single uplink and single downlink method. However, some missions have more complex communications systems; for example, having a slower, but more reliable downlink method for transmitting a small health-and-status beacon and then a faster, but more error-prone method for transmitting more detailed telemetry information. The communications service framework provides mechanisms to handle these more complex configurations. The service's :doc:`config.toml <../services/service-config>` file should contain the following parameters: - ``max_num_handlers`` - (Default: 50) The maximum number of concurrent message handlers allowed - ``downlink_ports`` - (Optional) List of ports used by downlink endpoints that send messages to the ground. Each port in the list will be used by one downlink endpoint - ``timeout`` - (Default: 1500) Length of time a message handler should wait for a reply, in milliseconds - ``ground_ip`` - (Required) IP address of the ground gateway - ``ground_port`` - (Required if ``downlink_ports`` is present) UDP port of the ground gateway - ``satellite_ip`` - (Required) IP address of the communications service The service which implements the framework should create a |CommsControlBlock|, which provides the final configuration to the main communication logic. It contains the following members: - ``read_conn`` - This is the connection structure which is used for reading from the communications device, for example a UART port or UDP socket - ``write_conn`` - This is the connection structure which is used for reading from the communications device, for example a UART port or UDP socket - ``read`` - (Optional) A pointer to the function which should be used to read a message from the communications device - ``write`` - A list of function pointers for all available ways that messages may be written to the communications device - ``max_num_handlers`` - Should be copied from the corresponding `config.toml` value - ``downlink_ports`` - Should be copied from the corresponding `config.toml` value or ``None`` - ``timeout`` - Should be copied from the corresponding `config.toml` value - ``ground_ip`` - Should be copied from the corresponding `config.toml` value - ``ground_port`` - Should be copied from the corresponding `config.toml` value - ``satellite_ip`` - Should be copied from the corresponding `config.toml` value .. warning:: If downlink endpoints are being used, the number of function pointers in the ``write`` list **must be equal** to the number of ports in the ``downlink_ports`` list. Implementation -------------- Because communication methods may vary from mission to mission, it is up to the user to create the final hardware service/s which will be used for communication with the ground. The service which implements the communications service framework should utilize only a single communication device. If multiple devices are present in the system, a service should be created for each of them. The service should contain the following components: - A function capable of reading messages from the communications device (note: this may be omitted in the case where the communications device will only be used for transmitting data) - At least one function capable of writing messages to the communications device - Initialized connection structure/s which will be used by the previous read and/or write functions - A |CommsControlBlock| structure containing all of the communications configuration information - A |CommsTelemetry| structure which will be used to gather communication statistics It is recommended that the service also follow the guidelines for :doc:`normal hardware services `. Some support for communicating with specific hardware devices has been provided in various :doc:`hardware APIs <../apis/device-api/index>`. For more information about how to implement a communications service, please refer to the following resources: - |comms-service| - :doc:`Comms service tutorial <../tutorials/comms-service>` .. |comms-service| raw:: html Framework Rust documentation .. |CommsControlBlock| raw:: html CommsControlBlock .. |CommsTelemetry| raw:: html CommsTelemetry